Net+50, debug/production mode

I have a problem with the production mode on our Net+50 hardware. I think the controller should have more performance when the internal debug mode is switched off (Net+50 Hardware Reference, ARM debugger circuit). Is this correct? Thank you very much, Michael

Hi Michael, According to the kernelguide you should get 30% more performence, if you activate the compiler switch TX_DISABLE_ERROR_CHECKING. Your code size should also shrink a little bit. Personally I have never tried it… If you need more perfomance, you can of course change the compiler settings. I changed the compiler setting ( we are using the GNU compiler) from default optimization to speed optimization. As a result we had around 20 % more perfomance. Alex