# netos5.0 + Multi 2000 v3.5

**URL:** <https://forums.digi.com/t/netos5-0-multi-2000-v3-5/6018>\
**Category:** NET+OS\
**Created:** [April 24, 2003, 5:05pm UTC](https://forums.digi.com/t/netos5-0-multi-2000-v3-5/6018 "2003-04-24T17:05:34Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex016/uploads/digi/original/1X/11da31a6a1fbcd03ef21d3f785c317c824009ae2.png) [@system](https://forums.digi.com/u/system)\
**Post date:** [April 24, 2003, 5:05pm UTC](https://forums.digi.com/t/netos5-0-multi-2000-v3-5/6018/1 "2003-04-24T17:05:34Z")

</div>

I have an error message when I try to debug Netos5 project under Multi2000 v3.5 :- Can’t find command line RC file in the working directory, your local configure directory and the global configure directory: txarm.rc. Playing back from H:\GHS\arm35\defaults\os\_aware xarm.rc Anyone came up with this? Cheers. Regards, Minlin

---

<div class="post-metadata">

**Author:** ![voma](https://avatars.discourse-cdn.com/v4/letter/v/4bbf92/32.png) [@voma](https://forums.digi.com/u/voma)\
**Post date:** [April 25, 2003, 8:38am UTC](https://forums.digi.com/t/netos5-0-multi-2000-v3-5/6018/2 "2003-04-25T08:38:03Z")

</div>

Yes, I had the same problem. But I didn’t test, if it works just by copying the rc file. Regards, Volker

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex016/uploads/digi/original/1X/11da31a6a1fbcd03ef21d3f785c317c824009ae2.png) [@system](https://forums.digi.com/u/system)\
**Post date:** [April 25, 2003, 9:16am UTC](https://forums.digi.com/t/netos5-0-multi-2000-v3-5/6018/3 "2003-04-25T09:16:19Z")

</div>

After this error message, I cannot “reg” the target in the debug window. Anyone has got Greenhill v3.5 working with NETOS5 project? Cheers, Minlin

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex016/uploads/digi/original/1X/11da31a6a1fbcd03ef21d3f785c317c824009ae2.png) [@system](https://forums.digi.com/u/system)\
**Post date:** [April 25, 2003, 9:24am UTC](https://forums.digi.com/t/netos5-0-multi-2000-v3-5/6018/4 "2003-04-25T09:24:52Z")

</div>

I copy the following 3 files into GHS\arm35\ directory: txarm.rc txarm.plc tx.plc from GHS\arm35\defaults\os\_aware\u005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu005cu000d But Multi still output a message as follows:- Playing back from H:\GHS\arm35\defaults\os\_aware xarm.rc Connected to target `ocdserv rlpt1 arm7t -big -nobss -setup h:\NETOS5\_GH35  
et4032b.ocd’. Any idea will be appreciated. Minlin