# Network Discovery command on 900HP Pro's

**URL:** <https://forums.digi.com/t/network-discovery-command-on-900hp-pros/15896>\
**Category:** XBee - DigiMesh\
**Tags:** mesh, xbee-900hp\
**Created:** [December 6, 2015, 5:16pm UTC](https://forums.digi.com/t/network-discovery-command-on-900hp-pros/15896 "2015-12-06T17:16:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mordack](https://avatars.discourse-cdn.com/v4/letter/m/d9b06d/32.png) [@Mordack](https://forums.digi.com/u/Mordack)\
**Post date:** [December 6, 2015, 5:16pm UTC](https://forums.digi.com/t/network-discovery-command-on-900hp-pros/15896/1 "2015-12-06T17:16:42Z")

</div>

I presently have 12 Xbee 900Hp Pro modules and with Network discovery back-off (NT) set to 13 seconds, it will miss 1 or 2 modules in it’s discovery about 1 out of every 5 times I issue the ND command. I have to change NT to 30 seconds to reliable get them all. Is this time reasonable? I may very shortly be moving to 50+ 900HP’s. Should I then have to further increase NT? All parameters are at default but NI,NT and API.

---

<div class="post-metadata">

**Author:** ![asgm](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/asgm/32/3688_2.png) [@asgm](https://forums.digi.com/u/asgm)\
**Post date:** [December 7, 2015, 3:50am UTC](https://forums.digi.com/t/network-discovery-command-on-900hp-pros/15896/2 "2015-12-07T03:50:32Z")

</div>

For network of 12 modules, 30 seconds is more than sufficient. In fact, this should be fine for network of 50 nodes as well.

---

<div class="post-metadata">

**Author:** ![Mordack](https://avatars.discourse-cdn.com/v4/letter/m/d9b06d/32.png) [@Mordack](https://forums.digi.com/u/Mordack)\
**Post date:** [December 7, 2015, 1:34pm UTC](https://forums.digi.com/t/network-discovery-command-on-900hp-pros/15896/3 "2015-12-07T13:34:31Z")

</div>

Thanks for the response. Appreciate it.
