# Network key connect me

**URL:** <https://forums.digi.com/t/network-key-connect-me/3777>\
**Category:** Plug N' Play\
**Tags:** hardware\
**Created:** [July 26, 2007, 12:20pm UTC](https://forums.digi.com/t/network-key-connect-me/3777 "2007-07-26T12:20:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![EirikO](https://avatars.discourse-cdn.com/v4/letter/e/278dde/32.png) [@EirikO](https://forums.digi.com/u/EirikO)\
**Post date:** [July 26, 2007, 12:20pm UTC](https://forums.digi.com/t/network-key-connect-me/3777/1 "2007-07-26T12:20:08Z")

</div>

I have a Connect Wi-ME (integration kit) and try to configure it… I have discover it with a ad-hoc network from my pc, and try to set the correct parameters so I can use it with my access point. The problem is the Network key.  
When I click applay i get the message: “The network key must be in hex form”.  
But what if the network key is f.ex. “kfrss”?

---

<div class="post-metadata">

**Author:** ![pevandenburie](https://avatars.discourse-cdn.com/v4/letter/p/7feea3/32.png) [@pevandenburie](https://forums.digi.com/u/pevandenburie)\
**Post date:** [July 26, 2007, 1:06pm UTC](https://forums.digi.com/t/network-key-connect-me/3777/2 "2007-07-26T13:06:05Z")

</div>

I assume you need to convert :  
[http://asciitable.com/](http://asciitable.com/)

“kfrss” = 0x6b46727373

Paul