# New connectport X2D - unable to discover any ZB devices **URL:** \ **Category:** Digi Remote Manager\ **Tags:** connectport-x2, zb, setup\ **Created:** [October 20, 2017, 1:07pm UTC](https://forums.digi.com/t/new-connectport-x2d-unable-to-discover-any-zb-devices/18809 "2017-10-20T13:07:52Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![chrisgoder](https://avatars.discourse-cdn.com/v4/letter/c/c0e974/32.png) [@chrisgoder](https://forums.digi.com/u/chrisgoder)\ **Post date:** [October 20, 2017, 1:07pm UTC](https://forums.digi.com/t/new-connectport-x2d-unable-to-discover-any-zb-devices/18809/1 "2017-10-20T13:07:52Z")
Hi, sorry in advance if this is a very basic question. I am a little confused with setting up a new X2D ZB Router. Currently, I have both an X2D and an X4 ZB routers and a wall plug type temp/light sensor ( xbr-001-06 ). In the Digi remote management site if I remove all devices and add the X4 and then go to the “XBee Networks” page. I can see the X4 details and its role is a “Coordinator”. I can then do a discover and see the wall plug sensor appear in the list. ( in XBee Networks page ) My problem: If I remove all devices again and add the new X2D router to the Digi remote management site I can see the device listed and is connected, in the “Devices” page. But in the “XBee Networks” page there is no entry at all. Strangely if I then add the X4 to “Devices” and in turn navigate to the “XBee Networks” page the X2 will then show in the list as a “router” for the role (as opposed to Coordinator for the X4). In summary, I can’t seem to add the X2D to the “XBee Networks” page and then do a discovery for the wall plug sensor in the same way as the X4. What I expected: I thought I could add the X2D to “Devices” then in “XBee Networks” page see the X2D listed and perform a discover for ZB devices/sensors in the same way as I could with the X4. Please help - I am hoping the issue is a simple setting that I have missed. Thank you for you time ---
**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\ **Post date:** [October 24, 2017, 10:01am UTC](https://forums.digi.com/t/new-connectport-x2d-unable-to-discover-any-zb-devices/18809/2 "2017-10-24T10:01:46Z")
That is because the New X2D is configured as a Router and not a Coordinator. Only coordinators can establish networks. To resolve this, enable the CE command on your X2D and then issue a Global network reset (ATNR1) on your other XBee modules. This will tell them to release the current coordinator and network settings and go search for a new Coordinator. ---
**Author:** ![chrisgoder](https://avatars.discourse-cdn.com/v4/letter/c/c0e974/32.png) [@chrisgoder](https://forums.digi.com/u/chrisgoder)\ **Post date:** [October 24, 2017, 3:34pm UTC](https://forums.digi.com/t/new-connectport-x2d-unable-to-discover-any-zb-devices/18809/3 "2017-10-24T15:34:47Z")
Thank you, your reply has fixed my problem 🙂