# new RCM2250 for OP7200

**URL:** <https://forums.digi.com/t/new-rcm2250-for-op7200/9826>\
**Category:** Rabbit\
**Created:** [March 17, 2009, 12:50pm UTC](https://forums.digi.com/t/new-rcm2250-for-op7200/9826 "2009-03-17T12:50:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Markus1](https://avatars.discourse-cdn.com/v4/letter/m/f17d59/32.png) [@Markus1](https://forums.digi.com/u/Markus1)\
**Post date:** [March 17, 2009, 12:50pm UTC](https://forums.digi.com/t/new-rcm2250-for-op7200/9826/1 "2009-03-17T12:50:13Z")

</div>

Hi there,

somehow my original RCM2250 preconfigured f�r use with my op7200 got broken. I ordered a new module and just plugged it to my op7200.  
Now i’ve got the error message about a required GLTOUCHSCREEN.LIB.  
I read that i have to configure the board ID of the new RCM for use with a 7200 by setting the boardtype and calibrating but i’ve no idea how to do…

I hope anyone can help me.

---

<div class="post-metadata">

**Author:** ![Markus1](https://avatars.discourse-cdn.com/v4/letter/m/f17d59/32.png) [@Markus1](https://forums.digi.com/u/Markus1)\
**Post date:** [March 17, 2009, 3:04pm UTC](https://forums.digi.com/t/new-rcm2250-for-op7200/9826/2 "2009-03-17T15:04:21Z")

</div>

think I found the problem:

I am using the write\_idblock.c in version 2.06.  
But this is not compatible with Dynamic C 9.26 cause of TableVersion 5.

workaround should be using Dynamic C 9.10 or lower but I don’t like such kinds of “downgrades”.

Does anyone got a write\_idblock.c which is compatible with Dynamic C 9.26?

edit: got a new write\_idblock\_920\_926.c from Rabbit Support …  
problem solved