# newb xbee serial communications question...

**URL:** <https://forums.digi.com/t/newb-xbee-serial-communications-question/13298>\
**Category:** XBee - 802.15.4\
**Tags:** arduino, serial-communication, xbee\
**Created:** [July 11, 2014, 8:41am UTC](https://forums.digi.com/t/newb-xbee-serial-communications-question/13298 "2014-07-11T08:41:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![chuggins143](https://avatars.discourse-cdn.com/v4/letter/c/e47c2d/32.png) [@chuggins143](https://forums.digi.com/u/chuggins143)\
**Post date:** [July 11, 2014, 8:41am UTC](https://forums.digi.com/t/newb-xbee-serial-communications-question/13298/1 "2014-07-11T08:41:22Z")

</div>

I’m working on a project here that should be pretty basic, but I have a question about how the communications works with the XBee… I have two xbee’s, do they communicate one at a time… one sends/one receives and just go back and forth or can they send and receive simultaneously?

The reason I ask is because I want to have my computer (running LabVIEW) send a data string (a three digit number) when needed to the second xbee attached to a Arduino that will continuously transmitting data back.

Will I need to have some sort of timing scheme so they aren’t both sending and neither is listening, or will they send/receive at the same time?

I’m totally new to the xbee world, just hooked them up and got them talking today. Just need a little clarification on how they work.

Thanks!

Chad

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [July 15, 2014, 4:18pm UTC](https://forums.digi.com/t/newb-xbee-serial-communications-question/13298/2 "2014-07-15T16:18:41Z")

</div>

The XBee is a half duplex device that can only simulate a full duplex connection if the serial baud rate is less than 1/2 the throughput rate.
