# non-volatile memory

**URL:** <https://forums.digi.com/t/non-volatile-memory/19409>\
**Category:** XBee & XBee Gateway\
**Tags:** parameters, non-volatile, xbee\
**Created:** [April 24, 2018, 11:51am UTC](https://forums.digi.com/t/non-volatile-memory/19409 "2018-04-24T11:51:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![ranchu](https://avatars.discourse-cdn.com/v4/letter/r/8797f3/32.png) [@ranchu](https://forums.digi.com/u/ranchu)\
**Post date:** [April 24, 2018, 11:51am UTC](https://forums.digi.com/t/non-volatile-memory/19409/1 "2018-04-24T11:51:04Z")

</div>

Hello,

We plan to use units of xbee as point-to-point (wired).  
I would like to ask some questions:

1. Is it that two connected device can work out-of-the-box in transparent mode, or do they need to be configured first. for example I see that default address for source and destination is the same (0x8e). does it mean they don’t need any at-command configuration and start working directly in transparent mode ?

2. Which parameter is showing the default communication mode (between AT(transparent), API, and API escape). I did not find such parameter in the list in datasheet.

3. where is the non-volatile memory in which the parameters (configuration) are saved ? Is it the same as firmware ? I mean is the configuration saved togethere with firmware ?

4. Is it possible to purchase product with our custom parameters (different then default parameters) ?

Thanks you,  
ranran
