# NOT ABLE TO GET PWM OUTPUT FROM XBEE PRO S1

**URL:** <https://forums.digi.com/t/not-able-to-get-pwm-output-from-xbee-pro-s1/12757>\
**Category:** XBee - 802.15.4\
**Tags:** xbee\
**Created:** [April 1, 2014, 6:59am UTC](https://forums.digi.com/t/not-able-to-get-pwm-output-from-xbee-pro-s1/12757 "2014-04-01T06:59:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Shars89](https://avatars.discourse-cdn.com/v4/letter/s/5f9b8f/32.png) [@Shars89](https://forums.digi.com/u/Shars89)\
**Post date:** [April 1, 2014, 6:59am UTC](https://forums.digi.com/t/not-able-to-get-pwm-output-from-xbee-pro-s1/12757/1 "2014-04-01T06:59:40Z")

</div>

I am not able to get analog output from a xbee pro S1 in PWM0 whose physical pin is 6. I am able to get output in other module which is same pro S1 but not in this particular module. Any solution for correcting it. After buying, this is my first experiment and PWM output is not coming … PLEASE HELP ME OUT…

ALL SUGGESTIONS ARE WELCOME…

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [April 30, 2014, 2:58pm UTC](https://forums.digi.com/t/not-able-to-get-pwm-output-from-xbee-pro-s1/12757/2 "2014-04-30T14:58:59Z")

</div>

Are you using the corresponding Pin for the ADC input? That would be ADC0. Is PWM 0 set as PWM output, disabled or RSSI? It does matter. Try following [http://www.digi.com/support/kbase/kbaseresultdetl?id=2180](http://www.digi.com/support/kbase/kbaseresultdetl?id=2180) and [http://www.digi.com/support/kbase/kbaseresultdetl?id=2202](http://www.digi.com/support/kbase/kbaseresultdetl?id=2202)