# not respond in hyperterminal

**URL:** <https://forums.digi.com/t/not-respond-in-hyperterminal/1598>\
**Category:** XBee - 802.15.4\
**Created:** [November 25, 2010, 7:53am UTC](https://forums.digi.com/t/not-respond-in-hyperterminal/1598 "2010-11-25T07:53:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![vel](https://avatars.discourse-cdn.com/v4/letter/v/eb9ed0/32.png) [@vel](https://forums.digi.com/u/vel)\
**Post date:** [November 25, 2010, 7:53am UTC](https://forums.digi.com/t/not-respond-in-hyperterminal/1598/1 "2010-11-25T07:53:46Z")

</div>

i have using in XB24-Z7WI modem.It connected to pc hyper terminal which response of “+++” received in “OK”. But not responding in “AT” command.

---

<div class="post-metadata">

**Author:** ![djl](https://avatars.discourse-cdn.com/v4/letter/d/a183cd/32.png) [@djl](https://forums.digi.com/u/djl)\
**Post date:** [December 9, 2010, 1:23pm UTC](https://forums.digi.com/t/not-respond-in-hyperterminal/1598/2 "2010-12-09T13:23:38Z")

</div>

Which command do you exactly send to the modem?

Did you add ‘Carriage return’ (0x0D) to the command?  
e.g. ATCN
