# on an API v2 packet between two xbee S2B's, get a discovery status of 0x43

**URL:** <https://forums.digi.com/t/on-an-api-v2-packet-between-two-xbee-s2bs-get-a-discovery-status-of-0x43/15288>\
**Category:** XBee - 802.15.4\
**Tags:** discovery, end-device, discovery-status, xbee\
**Created:** [August 18, 2015, 2:13pm UTC](https://forums.digi.com/t/on-an-api-v2-packet-between-two-xbee-s2bs-get-a-discovery-status-of-0x43/15288 "2015-08-18T14:13:25Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hwestbrook](https://avatars.discourse-cdn.com/v4/letter/h/5f9b8f/32.png) [@hwestbrook](https://forums.digi.com/u/hwestbrook)\
**Post date:** [August 18, 2015, 2:13pm UTC](https://forums.digi.com/t/on-an-api-v2-packet-between-two-xbee-s2bs-get-a-discovery-status-of-0x43/15288/1 "2015-08-18T14:13:25Z")

</div>

once in a while, when I send a packet to a pin sleeping end device from a route, I get a discovery status back with the hex 0x43. This is not in the manual. What does this status type mean?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [August 31, 2015, 3:54pm UTC](https://forums.digi.com/t/on-an-api-v2-packet-between-two-xbee-s2bs-get-a-discovery-status-of-0x43/15288/2 "2015-08-31T15:54:53Z")

</div>

I believe that is now listed in the Frames interrupter in the XCTU 6.x.