# Please provide a sample program for demonstrating external interfacing of RCM4000 ?

**URL:** <https://forums.digi.com/t/please-provide-a-sample-program-for-demonstrating-external-interfacing-of-rcm4000/12876>\
**Category:** Rabbit Software\
**Tags:** rcm4000\
**Created:** [April 28, 2014, 4:00am UTC](https://forums.digi.com/t/please-provide-a-sample-program-for-demonstrating-external-interfacing-of-rcm4000/12876 "2014-04-28T04:00:20Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![AISWARYA\_RAJ](https://avatars.discourse-cdn.com/v4/letter/a/e9bcb4/32.png) [@AISWARYA\_RAJ](https://forums.digi.com/u/AISWARYA_RAJ)\
**Post date:** [April 28, 2014, 4:00am UTC](https://forums.digi.com/t/please-provide-a-sample-program-for-demonstrating-external-interfacing-of-rcm4000/12876/1 "2014-04-28T04:00:20Z")

</div>



---

<div class="post-metadata">

**Author:** ![cpigilam](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@cpigilam](https://forums.digi.com/u/cpigilam)\
**Post date:** [April 28, 2014, 6:31am UTC](https://forums.digi.com/t/please-provide-a-sample-program-for-demonstrating-external-interfacing-of-rcm4000/12876/2 "2014-04-28T06:31:27Z")

</div>

Hello, What exactly you want to interface with the RCM4000 and how you want to interface?

There is a sample applications MASTER\_DEMO.C under  
C:\DCRABBIT\_10.72\Samples\SlavePort  
Please check,It may useful.

---

<div class="post-metadata">

**Author:** ![AISWARYA\_RAJ](https://avatars.discourse-cdn.com/v4/letter/a/e9bcb4/32.png) [@AISWARYA\_RAJ](https://forums.digi.com/u/AISWARYA_RAJ)\
**Post date:** [April 29, 2014, 2:05am UTC](https://forums.digi.com/t/please-provide-a-sample-program-for-demonstrating-external-interfacing-of-rcm4000/12876/3 "2014-04-29T02:05:31Z")

</div>

Sir ,I want to interface two RCM4000 modules each other.

---

<div class="post-metadata">

**Author:** ![AISWARYA\_RAJ](https://avatars.discourse-cdn.com/v4/letter/a/e9bcb4/32.png) [@AISWARYA\_RAJ](https://forums.digi.com/u/AISWARYA_RAJ)\
**Post date:** [April 29, 2014, 2:05am UTC](https://forums.digi.com/t/please-provide-a-sample-program-for-demonstrating-external-interfacing-of-rcm4000/12876/4 "2014-04-29T02:05:25Z")

</div>

Sir ,I want to interface two RCM4000 modules each other.I am having lot of confusion regarding the parallel port interfacing ,data ,address lines,etc. as I haven’t yet interfaced any devices.

---

<div class="post-metadata">

**Author:** ![AISWARYA\_RAJ](https://avatars.discourse-cdn.com/v4/letter/a/e9bcb4/32.png) [@AISWARYA\_RAJ](https://forums.digi.com/u/AISWARYA_RAJ)\
**Post date:** [April 29, 2014, 2:05am UTC](https://forums.digi.com/t/please-provide-a-sample-program-for-demonstrating-external-interfacing-of-rcm4000/12876/5 "2014-04-29T02:05:19Z")

</div>

sir can u please provide your email-id ,so that I can enquire more about this topic ?

---

<div class="post-metadata">

**Author:** ![cpigilam](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@cpigilam](https://forums.digi.com/u/cpigilam)\
**Post date:** [April 29, 2014, 7:14am UTC](https://forums.digi.com/t/please-provide-a-sample-program-for-demonstrating-external-interfacing-of-rcm4000/12876/6 "2014-04-29T07:14:25Z")

</div>

Dear Aiswarya,

At digi website there is one more document regarding, How to interface two devices as a master and slave. I hope this helps you a lot.  
Please go through the below technical note.

[http://ftp1.digi.com/support/documentation/0220132\_a.pdf](http://ftp1.digi.com/support/documentation/0220132_a.pdf)

Thanks.

[http://ftp1.digi.com/support/documentation/0220132\_a.pdf](http://ftp1.digi.com/support/documentation/0220132_a.pdf)

---

<div class="post-metadata">

**Author:** ![cpigilam](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@cpigilam](https://forums.digi.com/u/cpigilam)\
**Post date:** [April 29, 2014, 8:24am UTC](https://forums.digi.com/t/please-provide-a-sample-program-for-demonstrating-external-interfacing-of-rcm4000/12876/7 "2014-04-29T08:24:11Z")

</div>

Hello Aiswarya,  
One more document that will useful for you.This is Rabbit 4000 processor user’s manual, In this doc explained that the communication between Master and slave. pls check the section 18.Slave port,I hope it might helpful.  
[http://ftp1.digi.com/support/documentation/019-0152\_N.pdf](http://ftp1.digi.com/support/documentation/019-0152_N.pdf)

Thanks.

---

<div class="post-metadata">

**Author:** ![AISWARYA\_RAJ](https://avatars.discourse-cdn.com/v4/letter/a/e9bcb4/32.png) [@AISWARYA\_RAJ](https://forums.digi.com/u/AISWARYA_RAJ)\
**Post date:** [May 1, 2014, 8:27am UTC](https://forums.digi.com/t/please-provide-a-sample-program-for-demonstrating-external-interfacing-of-rcm4000/12876/8 "2014-05-01T08:27:44Z")

</div>

Sir,so for interfacing two RCM4000 modules together,should we implement the master-slave technique?
