# Port Server  ts2 MEI

**URL:** <https://forums.digi.com/t/port-server-ts2-mei/6874>\
**Category:** Portserver TS\
**Created:** [August 21, 2004, 2:24pm UTC](https://forums.digi.com/t/port-server-ts2-mei/6874 "2004-08-21T14:24:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ray](https://avatars.discourse-cdn.com/v4/letter/r/e9a140/32.png) [@ray](https://forums.digi.com/u/ray)\
**Post date:** [August 21, 2004, 2:24pm UTC](https://forums.digi.com/t/port-server-ts2-mei/6874/1 "2004-08-21T14:24:23Z")

</div>

Recieved with a preset ip address and wish to default it to factory 000  
Is it possible to do without having to down load its config to edit and then up load.

I tried the old reset button in out in again hold for three blinks  
thank you all

---

<div class="post-metadata">

**Author:** ![shatman](https://avatars.discourse-cdn.com/v4/letter/s/46a35a/32.png) [@shatman](https://forums.digi.com/u/shatman)\
**Post date:** [August 23, 2004, 12:01pm UTC](https://forums.digi.com/t/port-server-ts2-mei/6874/2 "2004-08-23T12:01:53Z")

</div>

You can use #\>boot action=factory from the command prompt, or press and hold reset button and power cycle the unit while holding it down