# PortServer TS 16

**URL:** <https://forums.digi.com/t/portserver-ts-16/6960>\
**Category:** Portserver TS\
**Created:** [March 18, 2010, 4:51pm UTC](https://forums.digi.com/t/portserver-ts-16/6960 "2010-03-18T16:51:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![piqiu](https://avatars.discourse-cdn.com/v4/letter/p/58956e/32.png) [@piqiu](https://forums.digi.com/u/piqiu)\
**Post date:** [March 18, 2010, 4:51pm UTC](https://forums.digi.com/t/portserver-ts-16/6960/1 "2010-03-18T16:51:21Z")

</div>

Hi,  
I have a problem using this device to communicate with a simple modem. I use straight ETH cable with 76000697 (female) and 76000701 (male) rs232-\>rj45 converter. When plugged to some device (using 76000697), there is no problem with communication. But when I use 76000701 for modem, HT receive rubbish after AT command.  
I think rs232-\>rj45 converters are good, because when I am making a loop using TS -\> ETH cable -\> 76000697 -\> 76000701 -\> ETH cable -\> TS, I can communicate from one HT to the other.

Can sb help me 🙂

---

<div class="post-metadata">

**Author:** ![Yeshas](https://avatars.discourse-cdn.com/v4/letter/y/a88e4f/32.png) [@Yeshas](https://forums.digi.com/u/Yeshas)\
**Post date:** [September 6, 2012, 11:05am UTC](https://forums.digi.com/t/portserver-ts-16/6960/2 "2012-09-06T11:05:59Z")

</div>

Hi  
Please refer to the link

[http://www.digi.com/support/productdetail?pid=2247](http://www.digi.com/support/productdetail?pid=2247)