# Possible to set up a hunt group for for different IP's residing in different VLANs?

**URL:** <https://forums.digi.com/t/possible-to-set-up-a-hunt-group-for-for-different-ips-residing-in-different-vlans/17944>\
**Category:** Serial Servers & Infrastructure Mangement\
**Tags:** portserver, redundancy, group, one, ts\
**Created:** [January 27, 2017, 5:26pm UTC](https://forums.digi.com/t/possible-to-set-up-a-hunt-group-for-for-different-ips-residing-in-different-vlans/17944 "2017-01-27T17:26:12Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mweimer](https://avatars.discourse-cdn.com/v4/letter/m/e9a140/32.png) [@mweimer](https://forums.digi.com/u/mweimer)\
**Post date:** [January 27, 2017, 5:26pm UTC](https://forums.digi.com/t/possible-to-set-up-a-hunt-group-for-for-different-ips-residing-in-different-vlans/17944/1 "2017-01-27T17:26:12Z")

</div>

I have a client device that has 2 serial ports (port A and port B ) for redundancy. There are 2 redundant servers that this device will query, each having a backup (servers 1-1 and 1-2 in VLAN1 and servers 2-1 and 2-2 in VLAN2). Port A should always query server 1-1 unless there’s a failure and port B should always query server 2-1 unless there’s a failure. The Digi will need to autoconnect via TCP to establish the initial connection but the serial device will send it’s own “keep-alive” message every 60 seconds to which the server will respond with a success or failure response. If port A receives a failure or loses connection, it should attempt server 1-2, then 2-2. The same logic should apply to a failure on port B. Is this possible with either the Digi One or Digi PortServer TS?