# Power TX control

**URL:** <https://forums.digi.com/t/power-tx-control/2048>\
**Category:** XBee - Point-to-Point/Multi-Point\
**Created:** [July 2, 2012, 4:23pm UTC](https://forums.digi.com/t/power-tx-control/2048 "2012-07-02T16:23:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![salviador](https://avatars.discourse-cdn.com/v4/letter/s/7993a0/32.png) [@salviador](https://forums.digi.com/u/salviador)\
**Post date:** [July 2, 2012, 4:23pm UTC](https://forums.digi.com/t/power-tx-control/2048/1 "2012-07-02T16:23:30Z")

</div>

Hi, In the configuration of xbee pro 900 (XBP09-DP) I can’t see the section of power level control

How setting power level at maximum power tx ?

---

<div class="post-metadata">

**Author:** ![kjensen8](https://avatars.discourse-cdn.com/v4/letter/k/8e8cbc/32.png) [@kjensen8](https://forums.digi.com/u/kjensen8)\
**Post date:** [July 30, 2012, 10:33pm UTC](https://forums.digi.com/t/power-tx-control/2048/2 "2012-07-30T22:33:40Z")

</div>

salviador,

Certain PRO modules have their transmit power set and it can’t be changed.

Keith