# Problem CAN rabbitweb 6700

**URL:** <https://forums.digi.com/t/problem-can-rabbitweb-6700/10850>\
**Category:** Rabbit\
**Created:** [April 27, 2011, 3:57pm UTC](https://forums.digi.com/t/problem-can-rabbitweb-6700/10850 "2011-04-27T15:57:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![greazout](https://avatars.discourse-cdn.com/v4/letter/g/d26b3c/32.png) [@greazout](https://forums.digi.com/u/greazout)\
**Post date:** [April 27, 2011, 3:57pm UTC](https://forums.digi.com/t/problem-can-rabbitweb-6700/10850/1 "2011-04-27T15:57:22Z")

</div>

Hi !

i’m a french student and i work on the rabbitweb 6700 with the prototyping board.  
I’ve an important project, and this use a thermical resistance, and i would convert the analogic value of this…  
My english isn’t verry good and correct, but i hope you understand me .

In the Samples in Dynamic C I haven’t find CAN…

The projet must active some électrovanne in function the return of the value of the thermical resistance.  
I need somme Help… Please

---

<div class="post-metadata">

**Author:** ![cpigilam](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@cpigilam](https://forums.digi.com/u/cpigilam)\
**Post date:** [April 28, 2011, 10:29am UTC](https://forums.digi.com/t/problem-can-rabbitweb-6700/10850/2 "2011-04-28T10:29:25Z")

</div>

Hi,  
I think in the Rabbit processors directly they do not support CAN protocol. You have to design your own hardware with CAN capability…