# Problem in configuring xbee S2C Coordinator - Router AT mode

**URL:** https://forums.digi.com/t/problem-in-configuring-xbee-s2c-coordinator-router-at-mode/17641
**Category:** XBee & XBee Gateway
**Tags:** mode, xbee-s2c-confguratio
**Created:** [November 29, 2016, 4:09pm UTC](https://forums.digi.com/t/problem-in-configuring-xbee-s2c-coordinator-router-at-mode/17641 "2016-11-29T16:09:41Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Kapil](https://avatars.discourse-cdn.com/v4/letter/k/b9bd4f/32.png) [@Kapil](https://forums.digi.com/u/Kapil)
#### Post date: [November 29, 2016, 4:09pm UTC](https://forums.digi.com/t/problem-in-configuring-xbee-s2c-coordinator-router-at-mode/17641/1 "2016-11-29T16:09:41Z")

</div>

I have configured two S2C modules for a simple RF communication in AT mode.

1.I have set the PAN ID to the same value in both the modules.  
2. Set the destination addresses  
3. Set CE to 1 in Coordinator module and CE to 0 in the Router module.

But still they are not communicating  
Please help me out…

---

<div class="post-metadata">

### Author: ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)
#### Post date: [November 29, 2016, 4:29pm UTC](https://forums.digi.com/t/problem-in-configuring-xbee-s2c-coordinator-router-at-mode/17641/2 "2016-11-29T16:29:25Z")

</div>

Try issuing a local network rest to your router (ATNR0). Also make sure that the mac address begins with 0013A200 and not just 13A200.

---

<div class="post-metadata">

### Author: ![toby](https://avatars.discourse-cdn.com/v4/letter/t/7993a0/32.png) [@toby](https://forums.digi.com/u/toby)
#### Post date: [November 30, 2016, 8:55am UTC](https://forums.digi.com/t/problem-in-configuring-xbee-s2c-coordinator-router-at-mode/17641/3 "2016-11-30T08:55:28Z")

</div>

Hi, can you connect and  
chat back and forth in XCTU utility ?