# Problem with USB Ethernet Driver

**URL:** <https://forums.digi.com/t/problem-with-usb-ethernet-driver/8463>\
**Category:** Edgeport\
**Created:** [April 12, 2012, 2:54pm UTC](https://forums.digi.com/t/problem-with-usb-ethernet-driver/8463 "2012-04-12T14:54:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bmigette](https://avatars.discourse-cdn.com/v4/letter/b/2acd7d/32.png) [@bmigette](https://forums.digi.com/u/bmigette)\
**Post date:** [April 12, 2012, 2:54pm UTC](https://forums.digi.com/t/problem-with-usb-ethernet-driver/8463/1 "2012-04-12T14:54:07Z")

</div>

Hello All,  
I am trying to use my new UsbAnywhere/14 hub with wireless and wired adapter. While the wireless adapter works fine, the wired adapter only works under windows XP (SP3). When I connect it under Windows7, it says “device cannot start (code 10)”

I tried both Win 7 x86 and x64. If I plug the adapter to a Win7 computer, it works just fine.

The USB Ethernet device uses chipset AX88772.  
I had tried with the latest Anywhere USB Drivers that I got from your site.

Any Idea what I could check now ?

Note: The computer have an interface in the same subnet than the anywhereUSB Hub, so a new adapter won’t cause traffic to be dropped AFAIK

---

<div class="post-metadata">

**Author:** ![Campbell](https://avatars.discourse-cdn.com/v4/letter/c/97f17d/32.png) [@Campbell](https://forums.digi.com/u/Campbell)\
**Post date:** [April 25, 2012, 5:03pm UTC](https://forums.digi.com/t/problem-with-usb-ethernet-driver/8463/2 "2012-04-25T17:03:05Z")

</div>

That is a Windows error concerning the driver. You should completely unistall the driver and reinstall. See the instructions here

[http://pcsupport.about.com/od/findbyerrormessage/a/code-10-error.htm](http://pcsupport.about.com/od/findbyerrormessage/a/code-10-error.htm)

Hope this helps