# Programming ME

**URL:** <https://forums.digi.com/t/programming-me/5466>\
**Category:** NET+OS\
**Created:** [December 11, 2006, 4:40pm UTC](https://forums.digi.com/t/programming-me/5466 "2006-12-11T16:40:55Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![hscadore81](https://avatars.discourse-cdn.com/v4/letter/h/bc79bd/32.png) [@hscadore81](https://forums.digi.com/u/hscadore81)\
**Post date:** [December 11, 2006, 4:40pm UTC](https://forums.digi.com/t/programming-me/5466/1 "2006-12-11T16:40:55Z")

</div>

I have Digi Connect Me that i can access by web browser or telnet with the board with power suply and rs-232 interface ive built (i have NO integration kit or development board).

I want to program the module and i wonder what role the hardware of developement kit plays and if i have Net+Works or LxNETES i could programm the module without any extra hardware than the one i have . And even i know its a not very smart question to post here i would like to ask if there is a free software to do it. Thanks a lot!

Obs.: im new to emebedded development.

Regards.

Henrique