# Question about API mode

**URL:** <https://forums.digi.com/t/question-about-api-mode/1783>\
**Category:** XBee - 802.15.4\
**Created:** [February 20, 2012, 7:11pm UTC](https://forums.digi.com/t/question-about-api-mode/1783 "2012-02-20T19:11:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bboyhard](https://avatars.discourse-cdn.com/v4/letter/b/9fc29f/32.png) [@bboyhard](https://forums.digi.com/u/bboyhard)\
**Post date:** [February 20, 2012, 7:11pm UTC](https://forums.digi.com/t/question-about-api-mode/1783/1 "2012-02-20T19:11:04Z")

</div>

I am working on a project that I will be using 3 xbees in total.

I have the Sparkfun xbee usb board for programming aswell as the older Arduino uno.

I will be using microchip microcontrollers for the project in the end, so my problem is that i cant seem to get the xbees to talk with eachother in api mode when using just a generic FTDI-ttl cable.

I can get them to successfully communicate when i use the arduino in reset mode and the sparkfun xbee adapter board.

ive tried usng the example packet of:

7E 00 0A 01 01 50 01 00 48 65 6C 6C 6F B8

Am i missing something?

---

<div class="post-metadata">

**Author:** ![chobichan](https://avatars.discourse-cdn.com/v4/letter/c/a8b319/32.png) [@chobichan](https://forums.digi.com/u/chobichan)\
**Post date:** [February 21, 2012, 3:00am UTC](https://forums.digi.com/t/question-about-api-mode/1783/2 "2012-02-21T03:00:26Z")

</div>

konnichiwa,

I think that there is no problem in this frame as long as frame data is checked.

Unless it offers information more, where a problem is cannot answer.
