# Rabbit 2000/Dynamic C 9.62 Exit Codes

**URL:** <https://forums.digi.com/t/rabbit-2000-dynamic-c-9-62-exit-codes/10618>\
**Category:** Rabbit\
**Created:** [June 8, 2011, 4:27pm UTC](https://forums.digi.com/t/rabbit-2000-dynamic-c-9-62-exit-codes/10618 "2011-06-08T16:27:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Maucher](https://avatars.discourse-cdn.com/v4/letter/m/65b543/32.png) [@Maucher](https://forums.digi.com/u/Maucher)\
**Post date:** [June 8, 2011, 4:27pm UTC](https://forums.digi.com/t/rabbit-2000-dynamic-c-9-62-exit-codes/10618/1 "2011-06-08T16:27:30Z")

</div>

Rabbit 2000 and a ~4K line code program I ‘inherited’ from someone else and trying to get it to talk MODBUS over Ethernet. Software will compile and run for about 10 seconds then get, “Program Terminated. Exit Code 17201.” Sometimes it terminates earlier with exit code 815.

Is there anywhere to look up these codes?

Thanks,  
Marty.

Setup:  
Rabbit 2000  
Dynamic C 9.62  
A/D board  
Digital I/O board  
D/A board  
Windows 7  
Using these library files:  
#use “smrtstar.lib”  
#use “ucos2.lib”  
#use “dcrtcp.lib”  
#use “SERX.LIB” // Generalized serial library  
#use “tftp.lib” // Trivial FTP library
