# RabbitCore 4000 series 5V tolerant?

**URL:** <https://forums.digi.com/t/rabbitcore-4000-series-5v-tolerant/9295>\
**Category:** Rabbit\
**Created:** [July 27, 2008, 5:48pm UTC](https://forums.digi.com/t/rabbitcore-4000-series-5v-tolerant/9295 "2008-07-27T17:48:57Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Elrin](https://avatars.discourse-cdn.com/v4/letter/e/3da27b/32.png) [@Elrin](https://forums.digi.com/u/Elrin)\
**Post date:** [July 27, 2008, 5:48pm UTC](https://forums.digi.com/t/rabbitcore-4000-series-5v-tolerant/9295/1 "2008-07-27T17:48:57Z")

</div>

Hi there,

I’ve been trying to find out somewhere in the documentation whether the 4000 series RabbitCore modules are 5V tolerant (I/O), like the 3000 series. Any-one know if this is still the case?

Thanks!

Jaco

---

<div class="post-metadata">

**Author:** ![Raphael](https://avatars.discourse-cdn.com/v4/letter/r/edb3f5/32.png) [@Raphael](https://forums.digi.com/u/Raphael)\
**Post date:** [July 30, 2008, 11:40pm UTC](https://forums.digi.com/t/rabbitcore-4000-series-5v-tolerant/9295/2 "2008-07-30T23:40:03Z")

</div>

You have the choice of 3.3 or 1.8 volts.

---

<div class="post-metadata">

**Author:** ![pobot\_eric](https://avatars.discourse-cdn.com/v4/letter/p/919ad9/32.png) [@pobot\_eric](https://forums.digi.com/u/pobot_eric)\
**Post date:** [November 1, 2008, 1:10pm UTC](https://forums.digi.com/t/rabbitcore-4000-series-5v-tolerant/9295/3 "2008-11-01T13:10:03Z")

</div>

Hello,

I’ve the same question for the Rabbit 5000.

But from the reply above, I guess no, and it means that I’ll need level converters to connect 5V I2C devices or encoders. Is it right ?

TIA for any feedback.

---

<div class="post-metadata">

**Author:** ![ArcAngelCT](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@ArcAngelCT](https://forums.digi.com/u/ArcAngelCT)\
**Post date:** [January 9, 2009, 2:28am UTC](https://forums.digi.com/t/rabbitcore-4000-series-5v-tolerant/9295/4 "2009-01-09T02:28:12Z")

</div>

The RCM 4300 is 5-V-I/O tolerant. This is stated in Appendix A of the RCM 4300 manual

---

<div class="post-metadata">

**Author:** ![pobot\_eric](https://avatars.discourse-cdn.com/v4/letter/p/919ad9/32.png) [@pobot\_eric](https://forums.digi.com/u/pobot_eric)\
**Post date:** [January 9, 2009, 10:14am UTC](https://forums.digi.com/t/rabbitcore-4000-series-5v-tolerant/9295/5 "2009-01-09T10:14:01Z")

</div>

Thanks for the information.

Best regards

Eric
