# Rabbitweb - problem with submit's form

**URL:** <https://forums.digi.com/t/rabbitweb-problem-with-submits-form/9932>\
**Category:** Rabbit\
**Created:** [July 21, 2007, 5:45pm UTC](https://forums.digi.com/t/rabbitweb-problem-with-submits-form/9932 "2007-07-21T17:45:32Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![koutasek](https://avatars.discourse-cdn.com/v4/letter/k/4bbf92/32.png) [@koutasek](https://forums.digi.com/u/koutasek)\
**Post date:** [July 21, 2007, 5:45pm UTC](https://forums.digi.com/t/rabbitweb-problem-with-submits-form/9932/1 "2007-07-21T17:45:32Z")

</div>

Hi, I try to make simple html form by using rabbitweb module(zhtml) for serial setting. My problem is: when I use in zhtml file all form inputs, whitch I need for set serial port, form is not submit to Dynamic / form not works. When I use only one input form is submit / form works OK.

Example zhtml file, whitch not works:

[SIZE=“1”]

---

<div class="post-metadata">

**Author:** ![DTriskel](https://avatars.discourse-cdn.com/v4/letter/d/47e85d/32.png) [@DTriskel](https://forums.digi.com/u/DTriskel)\
**Post date:** [July 31, 2007, 8:48am UTC](https://forums.digi.com/t/rabbitweb-problem-with-submits-form/9932/2 "2007-07-31T08:48:27Z")

</div>

> [@koutasek;681](#):
>
> ```
> SELECTED &gt;7 
> SELECTED &gt;8 
>     
>   
> 
>   
> Stopbits:
>   
>   
>      
> SELECTED &gt;1 
> SELECTED &gt;2 
> 
> ```

Shouldn’t it be ‘config.databits’ instead of ‘config.stopbits’?

---

<div class="post-metadata">

**Author:** ![koutasek](https://avatars.discourse-cdn.com/v4/letter/k/4bbf92/32.png) [@koutasek](https://forums.digi.com/u/koutasek)\
**Post date:** [July 31, 2007, 5:02pm UTC](https://forums.digi.com/t/rabbitweb-problem-with-submits-form/9932/3 "2007-07-31T17:02:22Z")

</div>

> [@DTriskel;715](#):
>
> Shouldn’t it be ‘config.databits’ instead of ‘config.stopbits’?

Hi. I found this mistake too, but this was not error. Form didn’t work. So I did it another way. I use:  
in dynamic  
#web configBlock.ser.databits select(“7” = PARAM\_7BIT, “8” = PARAM\_8BIT)  
#web configBlock.ser.stopbits select(“1” = 1, “2” = 2)

and on web

```
	SELECTED

&gt;

```

and now it works good. thank you for your answer 😉