# rcm3000 and http sample codes

**URL:** <https://forums.digi.com/t/rcm3000-and-http-sample-codes/10652>\
**Category:** Rabbit\
**Created:** [October 24, 2011, 6:07pm UTC](https://forums.digi.com/t/rcm3000-and-http-sample-codes/10652 "2011-10-24T18:07:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![escherer](https://avatars.discourse-cdn.com/v4/letter/e/d78d45/32.png) [@escherer](https://forums.digi.com/u/escherer)\
**Post date:** [October 24, 2011, 6:07pm UTC](https://forums.digi.com/t/rcm3000-and-http-sample-codes/10652/1 "2011-10-24T18:07:00Z")

</div>

Hello:

I start playing with a RCM3000 board, when I try to test ny of the code samples for http alwais I have the following error:

Out of xmem code space, use a larger ROM/RAM.

a) Is the RCM3000 able to work with that sample codes??

or

b) Do I need to change some parameters at the compiling time??

Thanks in advance for your help

---

<div class="post-metadata">

**Author:** ![cpigilam](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@cpigilam](https://forums.digi.com/u/cpigilam)\
**Post date:** [November 22, 2011, 8:12am UTC](https://forums.digi.com/t/rcm3000-and-http-sample-codes/10652/2 "2011-11-22T08:12:17Z")

</div>

Hello, Try to enable the “Enable separate instruction and data spaces” from Dynamic C IDE–\>options–\>compiler–\>Separate Instruction & Data Space.

Then try to compile…

Which development board you are using? based on that read the user manual from the digi site.

[http://www.digi.com/support/supporttype.jsp?tp=3](http://www.digi.com/support/supporttype.jsp?tp=3)

I think it will help you…

Thank you,  
cpigilam
