# RCM6700 userblock

**URL:** <https://forums.digi.com/t/rcm6700-userblock/20876>\
**Category:** Rabbit\
**Tags:** rcm6700, userblock\
**Created:** [November 6, 2019, 3:14pm UTC](https://forums.digi.com/t/rcm6700-userblock/20876 "2019-11-06T15:14:59Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![aroct](https://avatars.discourse-cdn.com/v4/letter/a/ad7895/32.png) [@aroct](https://forums.digi.com/u/aroct)\
**Post date:** [November 6, 2019, 3:14pm UTC](https://forums.digi.com/t/rcm6700-userblock/20876/1 "2019-11-06T15:14:59Z")

</div>

Hi

the useblock memory lost info when I unplug the RCM6700  
but it was working before.  
When I run the userblock demo, it work fine and it does keep info

Marcus

---

<div class="post-metadata">

**Author:** ![TomCollins](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/tomcollins/32/37_2.png) [@TomCollins](https://forums.digi.com/u/TomCollins)\
**Post date:** [November 6, 2019, 4:51pm UTC](https://forums.digi.com/t/rcm6700-userblock/20876/2 "2019-11-06T16:51:41Z")

</div>

The RCM6700 stores the UserBlock on the serial flash, which persists even if you disconnect power.

Can you share the relevant portions of your code? If the demo code works fine, it’s probably an error in how you’re making use of the UserBlock APIs.

Is it possible you’re erasing or overwriting the UserBlock data on startup?
