# read a frame and process data received

**URL:** <https://forums.digi.com/t/read-a-frame-and-process-data-received/16209>\
**Category:** XBee Programamble (S2C & 900 HP)\
**Tags:** programmable, development, xbee\
**Created:** [February 4, 2016, 12:56pm UTC](https://forums.digi.com/t/read-a-frame-and-process-data-received/16209 "2016-02-04T12:56:05Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![xbeeElisa](https://avatars.discourse-cdn.com/v4/letter/x/7ab992/32.png) [@xbeeElisa](https://forums.digi.com/u/xbeeElisa)\
**Post date:** [February 4, 2016, 12:56pm UTC](https://forums.digi.com/t/read-a-frame-and-process-data-received/16209/1 "2016-02-04T12:56:05Z")

</div>

I would like a router, formed only by a programmable module xbee, draw up the frame received from xbee (end network device), and to process the received data and then send them to the coordinator. how could I do this? I read that I could use CodeWarrior to program modules with c / c ++. can I also use python? and instead of java libraries?

thanks a lot

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [February 4, 2016, 3:26pm UTC](https://forums.digi.com/t/read-a-frame-and-process-data-received/16209/2 "2016-02-04T15:26:32Z")

</div>

No, the XBee modules do not directly support Python. But you can use something like a Gateway that supports python to collect the data over an XBee network and do what ever you want with it.

---

<div class="post-metadata">

**Author:** ![xbeeElisa](https://avatars.discourse-cdn.com/v4/letter/x/7ab992/32.png) [@xbeeElisa](https://forums.digi.com/u/xbeeElisa)\
**Post date:** [February 4, 2016, 7:50pm UTC](https://forums.digi.com/t/read-a-frame-and-process-data-received/16209/3 "2016-02-04T19:50:24Z")

</div>

so, i can programming xbee modules ( routers, end devices) only with c/c++ with codewarrior?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [February 5, 2016, 12:32pm UTC](https://forums.digi.com/t/read-a-frame-and-process-data-received/16209/4 "2016-02-05T12:32:33Z")

</div>

That is correct. The programmable XBee modules 2nd processor only works with C.