# read coordinator

**URL:** <https://forums.digi.com/t/read-coordinator/15518>\
**Category:** XBee - 802.15.4\
**Tags:** coordinator, xbee-coordinator-rou, xbee, zigbee\
**Created:** [October 6, 2015, 8:54am UTC](https://forums.digi.com/t/read-coordinator/15518 "2015-10-06T08:54:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![PeterT](https://avatars.discourse-cdn.com/v4/letter/p/f1d935/32.png) [@PeterT](https://forums.digi.com/u/PeterT)\
**Post date:** [October 6, 2015, 8:54am UTC](https://forums.digi.com/t/read-coordinator/15518/1 "2015-10-06T08:54:38Z")

</div>

Here’s my setup:

- I have three XBee S1 in Router mode, AT mode, each sensing 3 ADC inputs. MY=FFFF
- 1 coordinator XBee S1 in API mode, hooked up to an Arduino over serial.

On the Arduino I get the three data streams from the routers. Using the MAC address in the message, I know where the message came from. This is all fine.

How could I also read the ADC values from the coordinator XBee? It could even work for me if the coordinator itself also added a record in the output to the Arduino in the same format as the routers.

Is this possible? How would I set this up?

(Hope I did not post this question twice… I could not find my original message)

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [October 6, 2015, 2:55pm UTC](https://forums.digi.com/t/read-coordinator/15518/2 "2015-10-06T14:55:19Z")

</div>

That requires you to simply issue a local IS command.
