# Recording data and printing it in ASCII values

**URL:** <https://forums.digi.com/t/recording-data-and-printing-it-in-ascii-values/19622>\
**Category:** XBee - 802.15.4\
**Tags:** serial-communication, xbee\
**Created:** [June 26, 2018, 12:45pm UTC](https://forums.digi.com/t/recording-data-and-printing-it-in-ascii-values/19622 "2018-06-26T12:45:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Enzo](https://avatars.discourse-cdn.com/v4/letter/e/3ab097/32.png) [@Enzo](https://forums.digi.com/u/Enzo)\
**Post date:** [June 26, 2018, 12:45pm UTC](https://forums.digi.com/t/recording-data-and-printing-it-in-ascii-values/19622/1 "2018-06-26T12:45:06Z")

</div>

Hello, I have data print in my console, from a remote sensor, in AT mode.  
When I record the data, the log data appears in Hexadecimal. Can I save it in ASCII values?