# Recovering XBee Pro 900HP 200k

**URL:** <https://forums.digi.com/t/recovering-xbee-pro-900hp-200k/21721>\
**Category:** XBee - DigiMesh\
**Tags:** bootloader, recovery, xbee\
**Created:** [August 31, 2020, 8:53am UTC](https://forums.digi.com/t/recovering-xbee-pro-900hp-200k/21721 "2020-08-31T08:53:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![XOMR](https://avatars.discourse-cdn.com/v4/letter/x/9d8465/32.png) [@XOMR](https://forums.digi.com/u/XOMR)\
**Post date:** [August 31, 2020, 8:53am UTC](https://forums.digi.com/t/recovering-xbee-pro-900hp-200k/21721/1 "2020-08-31T08:53:38Z")

</div>

Hello,

I incorrectly updated my one of my Xbee Pro 900HP radios and now XCTU does not detect it. When I try to run the Xbee Recovery tool on the COM port that the module is plugged into it I get an error message saying “There is not an active bootloader in the module.” Have I ruined this module or can I still recover it somehow?

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [August 31, 2020, 8:55am UTC](https://forums.digi.com/t/recovering-xbee-pro-900hp-200k/21721/2 "2020-08-31T08:55:57Z")

</div>

Have you tried using the steps outlined at [https://www.digi.com/support/knowledge-base/recovery-procedure-for-xbees](https://www.digi.com/support/knowledge-base/recovery-procedure-for-xbees) or optimized the USB ports?

---

<div class="post-metadata">

**Author:** ![XOMR](https://avatars.discourse-cdn.com/v4/letter/x/9d8465/32.png) [@XOMR](https://forums.digi.com/u/XOMR)\
**Post date:** [September 8, 2020, 8:23am UTC](https://forums.digi.com/t/recovering-xbee-pro-900hp-200k/21721/3 "2020-09-08T08:23:00Z")

</div>

Yes, I was able to restore the module using the legacy version of X-CTU. Thanks for your helP!