# Redirect STDIO to TCP port

**URL:** <https://forums.digi.com/t/redirect-stdio-to-tcp-port/10640>\
**Category:** Rabbit\
**Created:** [September 17, 2011, 10:26am UTC](https://forums.digi.com/t/redirect-stdio-to-tcp-port/10640 "2011-09-17T10:26:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![andrewdouble](https://avatars.discourse-cdn.com/v4/letter/a/f17d59/32.png) [@andrewdouble](https://forums.digi.com/u/andrewdouble)\
**Post date:** [September 17, 2011, 10:26am UTC](https://forums.digi.com/t/redirect-stdio-to-tcp-port/10640/1 "2011-09-17T10:26:28Z")

</div>

I would like to redirect all STDIO output to a TCP port, to provide me with debug messages when running the RCM5700 in normal (non debug) mode.

Then I would use something like PUTTY to show anything sent to that port number.

Does anyone have any ideas?

Many thanks.

---

<div class="post-metadata">

**Author:** ![fastwalker](https://avatars.discourse-cdn.com/v4/letter/f/85e7bf/32.png) [@fastwalker](https://forums.digi.com/u/fastwalker)\
**Post date:** [October 2, 2011, 6:34pm UTC](https://forums.digi.com/t/redirect-stdio-to-tcp-port/10640/2 "2011-10-02T18:34:06Z")

</div>

I am attempting something similar, making a copy of STDIO output available as a web page. See my post today on this board on how I did it. It’s working in development mode, but not working in full deployment mode yet.

Pls. PM me if you get your technique working or share it with the group?