# Remote upgrade on RCM5700

**URL:** <https://forums.digi.com/t/remote-upgrade-on-rcm5700/10961>\
**Category:** Rabbit\
**Created:** [April 15, 2010, 6:28pm UTC](https://forums.digi.com/t/remote-upgrade-on-rcm5700/10961 "2010-04-15T18:28:07Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![gcocchi](https://avatars.discourse-cdn.com/v4/letter/g/45deac/32.png) [@gcocchi](https://forums.digi.com/u/gcocchi)\
**Post date:** [April 15, 2010, 6:28pm UTC](https://forums.digi.com/t/remote-upgrade-on-rcm5700/10961/1 "2010-04-15T18:28:07Z")

</div>

I’m trying to develop a library to remote update the firmware on RCM5700.  
Cheking the content of a .BIN file and the memory image of the same program downloaded by DC10.62 I found that they are quite different…  
My answer is: must a .BIN file be loaded starting at address 0x00000 and going on sequentially or things are more complex?

Thank you in advance,  
Giorgio

---

<div class="post-metadata">

**Author:** ![ajcurtis84](https://avatars.discourse-cdn.com/v4/letter/a/8e7dd6/32.png) [@ajcurtis84](https://forums.digi.com/u/ajcurtis84)\
**Post date:** [April 29, 2010, 2:13am UTC](https://forums.digi.com/t/remote-upgrade-on-rcm5700/10961/2 "2010-04-29T02:13:04Z")

</div>

If this is a COTS board from Digi, I would recommend looking at shdesigns Ethernet download manager.

---

<div class="post-metadata">

**Author:** ![frad](https://avatars.discourse-cdn.com/v4/letter/f/e8c25b/32.png) [@frad](https://forums.digi.com/u/frad)\
**Post date:** [August 13, 2012, 12:48pm UTC](https://forums.digi.com/t/remote-upgrade-on-rcm5700/10961/3 "2012-08-13T12:48:54Z")

</div>

It is evident and obvious that regular surveillance through strong antivirus program is a necessity or rather a compulsion.But it often poses difficulty when an antivirus is installed owing to n number of causes.Causes are numerous but few among the most notable causes to aptly consider Remote Online Tech Support .
