# Resetting to default factory when the Wi-Me is injoinable
**URL:** https://forums.digi.com/t/resetting-to-default-factory-when-the-wi-me-is-injoinable/3901
**Category:** NET+OS
**Tags:** factory-defaults
**Created:** [September 26, 2006, 8:22am UTC](https://forums.digi.com/t/resetting-to-default-factory-when-the-wi-me-is-injoinable/3901 "2006-09-26T08:22:59Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@Tschneider](https://forums.digi.com/u/Tschneider)
#### Post date: [September 26, 2006, 8:22am UTC](https://forums.digi.com/t/resetting-to-default-factory-when-the-wi-me-is-injoinable/3901/1 "2006-09-26T08:22:59Z")
Hi everyone, sorry for my english, i’m french
We have a problem with a Wi-Me.
By trying to connect it to our private Wifi network (protected by a Web Key), we’ve got a problem
I put a new IP, netmask, SSID, WEP key…
I reboot the Wi-Me and now… it’s impossible to see it… (Ping, Web Interface, Digi discovery… nothing work !!!)
I’m sure it doesn’t have the IP adress i entered, it also don’t have the past Ip adress…
I think, it simply don’t have any Ip adress… bug ???
So, i thought “reset it to the factory default !”
But, how i can reset it to the factory default if i can’t communicate with it ???
I tryed the button on the right, but it simply reboot it…
… HELP please …
---
### Author:  [@thomas.kuhlmann](https://forums.digi.com/u/thomas.kuhlmann)
#### Post date: [October 25, 2013, 5:52am UTC](https://forums.digi.com/t/resetting-to-default-factory-when-the-wi-me-is-injoinable/3901/2 "2013-10-25T05:52:08Z")
On the Digi development board connect the /INIT pin to ground (pin20 /INIT to pin18 GND) for 10seconds during boot and release it. You will come up with default SSID=Connect and trying to connect to an “Open” unencrypted AccessPoint.
see ftp://ftp1.digi.com/support/firmware/93000608\_k1.txt section “resetting the unit”