# Root password

**URL:** <https://forums.digi.com/t/root-password/4206>\
**Category:** NET+OS\
**Tags:** password\
**Created:** [March 23, 2010, 9:53am UTC](https://forums.digi.com/t/root-password/4206 "2010-03-23T09:53:51Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![alex\_daft](https://avatars.discourse-cdn.com/v4/letter/a/eb8c5e/32.png) [@alex\_daft](https://forums.digi.com/u/alex_daft)\
**Post date:** [March 23, 2010, 9:53am UTC](https://forums.digi.com/t/root-password/4206/1 "2010-03-23T09:53:51Z")

</div>

Hi everybody,

I have bought a digi connect ME DC-ME-01T-C

On serial port i have this message

//////////////

NET+OS Version 6.x.2  
Copyright (c) 1997-2007, Digi International, Inc.

## PLATFORM: connectme APPLICATION: Ram-based FTP Server Application

## NETWORK INTERFACE PARAMETERS: The board will obtain IP configuration parameters from the network. HARDWARE PARAMETERS: Serial channels will use a baud rate of 9600 This board’s serial number is N99999999 This board’s Ethernet MAC Address is 00:40:9D:3C:D3:6C After board is reset, start-up code will wait 5 seconds Default duplex setting for Ethernet connection: default

Press any key in 5 seconds to change these settings.

Press A to Accept the settings, or M to Modify?  
Press A to Accept the settings, or M to Modify?  
Press A to Accept the settings, or M to Modify?  
Press A to Accept the settings, or M to Modify?  
Press A to Accept the settings, or M to Modify?  
Press A to Accept the settings, or M to Modify?M

Enter the root password:

//////////////////////////

dbps is not the password, what is the default password to configure?

Thks a lot

Alexandre

---

<div class="post-metadata">

**Author:** ![kubiajir](https://avatars.discourse-cdn.com/v4/letter/k/e19b73/32.png) [@kubiajir](https://forums.digi.com/u/kubiajir)\
**Post date:** [March 23, 2010, 3:00pm UTC](https://forums.digi.com/t/root-password/4206/2 "2010-03-23T15:00:40Z")

</div>

Hi try password. You can find the passord in appconf.h in definition APP\_ROOT\_PASSWORD

Take care about define APP\_USE\_NVRAM.

Jirka

---

<div class="post-metadata">

**Author:** ![egawtry](https://avatars.discourse-cdn.com/v4/letter/e/8e8cbc/32.png) [@egawtry](https://forums.digi.com/u/egawtry)\
**Post date:** [March 23, 2010, 3:26pm UTC](https://forums.digi.com/t/root-password/4206/3 "2010-03-23T15:26:58Z")

</div>

Try “netsilicon”

---

<div class="post-metadata">

**Author:** ![isaac](https://avatars.discourse-cdn.com/v4/letter/i/8e8cbc/32.png) [@isaac](https://forums.digi.com/u/isaac)\
**Post date:** [March 24, 2010, 4:35am UTC](https://forums.digi.com/t/root-password/4206/4 "2010-03-24T04:35:08Z")

</div>

The name of user is : root  
password is : password

---

<div class="post-metadata">

**Author:** ![LeonidM](https://avatars.discourse-cdn.com/v4/letter/l/d26b3c/32.png) [@LeonidM](https://forums.digi.com/u/LeonidM)\
**Post date:** [March 23, 2010, 8:57pm UTC](https://forums.digi.com/t/root-password/4206/5 "2010-03-23T20:57:39Z")

</div>

Actually try Netsilicon (capital N) or password