# RSSI values ​​are obtained in dbm?

**URL:** <https://forums.digi.com/t/rssi-values-are-obtained-in-dbm/12874>\
**Category:** XBee & XBee Gateway\
**Tags:** rssi, xbee\
**Created:** [April 28, 2014, 3:59am UTC](https://forums.digi.com/t/rssi-values-are-obtained-in-dbm/12874 "2014-04-28T03:59:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![maryxb](https://avatars.discourse-cdn.com/v4/letter/m/b487fb/32.png) [@maryxb](https://forums.digi.com/u/maryxb)\
**Post date:** [April 28, 2014, 3:59am UTC](https://forums.digi.com/t/rssi-values-are-obtained-in-dbm/12874/1 "2014-04-28T03:59:58Z")

</div>

hello! I want to read the RSSI of each of the routers remotely from the coordinator. . When I send the remote AT command for any of the routers, I returned the RSSI values​​,

I want to know if these values ​​was obtained dbm?

in one case the value obtained was “1C”

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [April 28, 2014, 2:07pm UTC](https://forums.digi.com/t/rssi-values-are-obtained-in-dbm/12874/2 "2014-04-28T14:07:13Z")

</div>

Yes it is a Hex value in dBm.