# RTC always read fixed value

**URL:** <https://forums.digi.com/t/rtc-always-read-fixed-value/5090>\
**Category:** NET+OS\
**Created:** [March 30, 2007, 7:55pm UTC](https://forums.digi.com/t/rtc-always-read-fixed-value/5090 "2007-03-30T19:55:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jack](https://avatars.discourse-cdn.com/v4/letter/j/cc9497/32.png) [@Jack](https://forums.digi.com/u/Jack)\
**Post date:** [March 30, 2007, 7:55pm UTC](https://forums.digi.com/t/rtc-always-read-fixed-value/5090/1 "2007-03-30T19:55:18Z")

</div>

Hi all,  
I want to use the RTC module of NS9360. I enabled the RTC in bsp.h and compiled it. the initialization and set time have been successfully done, but when I tried to get time from the RTc, it always read a fixed clock value with a success return value from the function.  
I’m using the Raven debugger and Net+os 6.2.  
Any clue about something might be wrong? Do I have to set up the clock somehow to let RTC running?  
Thanks in advance.  
Jack

---

<div class="post-metadata">

**Author:** ![charliek](https://avatars.discourse-cdn.com/v4/letter/c/94ad74/32.png) [@charliek](https://forums.digi.com/u/charliek)\
**Post date:** [May 16, 2007, 8:12pm UTC](https://forums.digi.com/t/rtc-always-read-fixed-value/5090/2 "2007-05-16T20:12:26Z")

</div>

Have you tried installing the BSP Fixes patch? [http://ftp1.digi.com/support/patches/BSPFixes\_62.htm](http://ftp1.digi.com/support/patches/BSPFixes_62.htm)