# SDRAM timing using NS7520B-1-C36

**URL:** <https://forums.digi.com/t/sdram-timing-using-ns7520b-1-c36/4661>\
**Category:** NET+OS\
**Created:** [November 1, 2004, 4:52pm UTC](https://forums.digi.com/t/sdram-timing-using-ns7520b-1-c36/4661 "2004-11-01T16:52:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![scholbert](https://avatars.discourse-cdn.com/v4/letter/s/977dab/32.png) [@scholbert](https://forums.digi.com/u/scholbert)\
**Post date:** [November 1, 2004, 4:52pm UTC](https://forums.digi.com/t/sdram-timing-using-ns7520b-1-c36/4661/1 "2004-11-01T16:52:40Z")

</div>

I’d like to use the 36MHz variant of the NS7520 together with a Micron MT48LC4M32B2TG SDRAM. Is that possible? To give some details: The clock is generated by a 18.432MHz crystal. PLL is active and preset via bootstrap option as described in the manual. So the internal SYS\_CLK should be about 36MHz. The BCLK signal is used as SDRAM-clock. Is BCLK equal to SYS\_CLK as shown in figure 4 of the manual or is BCLK=1/4\*SYS\_CLK as described in chapter 5 ? Do i have to modify the setting of BSPEED in this case ?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex016/uploads/digi/original/1X/11da31a6a1fbcd03ef21d3f785c317c824009ae2.png) [@system](https://forums.digi.com/u/system)\
**Post date:** [January 11, 2005, 4:05pm UTC](https://forums.digi.com/t/sdram-timing-using-ns7520b-1-c36/4661/2 "2005-01-11T16:05:14Z")

</div>

yes - that will get you 4MX32 refer to erratum and data sheets posted on NS site NOT HWM
