# Send data from DIGI WI-ME to remote server

**URL:** <https://forums.digi.com/t/send-data-from-digi-wi-me-to-remote-server/3673>\
**Category:** Plug N' Play\
**Tags:** tcp-sockets\
**Created:** [August 18, 2008, 10:19pm UTC](https://forums.digi.com/t/send-data-from-digi-wi-me-to-remote-server/3673 "2008-08-18T22:19:54Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Johnny](https://avatars.discourse-cdn.com/v4/letter/j/ecb155/32.png) [@Johnny](https://forums.digi.com/u/Johnny)\
**Post date:** [August 18, 2008, 10:19pm UTC](https://forums.digi.com/t/send-data-from-digi-wi-me-to-remote-server/3673/1 "2008-08-18T22:19:54Z")

</div>

Hi,  
I am using DIGI WIME -S module with plug and play firmware. I have try alots of method to send data to remote server from DIGI WIME. Unfortunately , it failed.  
The DIGI WIME is connected to network since i can access its WEB UI. Below are the commands that i send to DIGI WIME through serial.

“set wlan authentication=open\r”,  
“set wlan encryption=wep\r”,  
“set wlan channel=6\r”,  
“set wlan wepmode=128bit\r”,  
“set wlan ssid=myrouter\r”,  
“set wlan wepkey1=544301301D021764050087ABCD\r”,  
“set network gateway=192.168.1.1\r”,  
“set network submask=255.255.255.0\r”,  
“set network ip=192.168.1.109\r”,  
“set network dhcp=off\r”,  
“set network autoip=off\r”,  
“set network static=on\r”,  
“set autoconnect ipaddress=192.168.1.106\r”,  
“set autoconnect ipport=5001\r”,  
“set autoconnect connect\_on\_string=connecting\r”,  
“set autoconnect flush\_string=on\r”,  
“set autoconnect nodelay=on\r”,  
“set autoconnect state=on\r”,  
“set tcpserial buffered=on\r”,  
“set tcpserial endpattern=sent\r”,  
“connecting COME THE TESTING DATA sent”

* * *

* * *

After sending the commands, the serial replies from DIGIWIME are as follows;

#\> set wlan authentication=open  
Evaluation of your saved wireless settings:

#\> set wlan encryption=wep  
Evaluation of your saved wireless settings:

#\> set wlan channel=6  
Evaluation of your saved wireless settings:

#\> set wlan wepmode=128bit  
Evaluation of your saved wireless settings:

#\> set wlan ssid=myrouter  
Evaluation of your saved wireless settings:

#\> set wlan wepkey1=544301301D021764050087ABCD  
Evaluation of your saved wireless settings:

#\> set network gateway=192.168.1.1  
#\> set network submask=255.255.255.0  
#\> set network ip=192.168.1.109  
#\> set network dhcp=off  
#\> set network autoip=off  
#\> set network static=on  
#\> set autoconnect ipaddress=192.168.1.106  
#\> set autoconnect ipport=5001  
#\> set autoconnect trigger=string  
#\> set autoconnect connect\_on\_string=connecting  
#\> set autoconnect flush\_string=on  
#\> set autoconnect nodelay=on  
#\> set autoconnect state=on  
#\> set tcpserial buffered=on  
#\> set tcpserial endpattern=sent  
#\> connecting COME THE TESTING DATA sent

The server does not receive anything and i believe is due to the DIGI-WIME does not send out the data to server.  
Do I make mistakes on the configurations or other things ?  
Please help.

Thanks.