# send http request from xbee

**URL:** https://forums.digi.com/t/send-http-request-from-xbee/23080
**Category:** Plug N' Play
**Tags:** embedded, xbee3
**Created:** [May 24, 2022, 8:48am UTC](https://forums.digi.com/t/send-http-request-from-xbee/23080 "2022-05-24T08:48:09Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![evi555](https://avatars.discourse-cdn.com/v4/letter/e/b4bc9f/32.png) [@evi555](https://forums.digi.com/u/evi555)
#### Post date: [May 24, 2022, 8:48am UTC](https://forums.digi.com/t/send-http-request-from-xbee/23080/1 "2022-05-24T08:48:09Z")

</div>

hi! i want to send an http request with xbee using AT command (i dont want to use XCTU,i want to use putty).

i want to know what is the command that can i use to do it?

thanks a lot!

---

<div class="post-metadata">

### Author: ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)
#### Post date: [May 24, 2022, 10:59am UTC](https://forums.digi.com/t/send-http-request-from-xbee/23080/2 "2022-05-24T10:59:00Z")

</div>

Evi, the process is the exact same as what is in the manual. The only difference is what software you use. So in this case, once the destination address, ports and character are set, there are no other commands. You just send the data properly formatted.