# sending data of different baud rate

**URL:** <https://forums.digi.com/t/sending-data-of-different-baud-rate/1237>\
**Category:** XBee - 802.15.4\
**Created:** [September 7, 2009, 3:28am UTC](https://forums.digi.com/t/sending-data-of-different-baud-rate/1237 "2009-09-07T03:28:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![woshihk](https://avatars.discourse-cdn.com/v4/letter/w/c68b51/32.png) [@woshihk](https://forums.digi.com/u/woshihk)\
**Post date:** [September 7, 2009, 3:28am UTC](https://forums.digi.com/t/sending-data-of-different-baud-rate/1237/1 "2009-09-07T03:28:20Z")

</div>

Hi,

I’m trying to send data (baud rate 4800) through 2 XBee (Baud rate 9600). But i do not know whether it is possible. Any solutions or ideas to how i can do it? Need help…

Thanks

---

<div class="post-metadata">

**Author:** ![gworle](https://avatars.discourse-cdn.com/v4/letter/g/dec6dc/32.png) [@gworle](https://forums.digi.com/u/gworle)\
**Post date:** [September 8, 2009, 3:15am UTC](https://forums.digi.com/t/sending-data-of-different-baud-rate/1237/2 "2009-09-08T03:15:43Z")

</div>

The default serial baud rate of the radios is 9600. The serial baud rate can be modified from its default using the BD parameter (see manual for details). You can change the parameter using AT commands sent through the X-CTU or a serial terminal, or from a microcontroller.