# Sending GPS data to more than two connected IP devices (WR44) **URL:** \ **Category:** Digi TransPort WR (Series)\ **Tags:** ip, gps, wr44, broadcast\ **Created:** [November 29, 2016, 4:03pm UTC](https://forums.digi.com/t/sending-gps-data-to-more-than-two-connected-ip-devices-wr44/17672 "2016-11-29T16:03:16Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![DC1](https://avatars.discourse-cdn.com/v4/letter/d/8dc957/32.png) [@DC1](https://forums.digi.com/u/DC1)\ **Post date:** [November 29, 2016, 4:03pm UTC](https://forums.digi.com/t/sending-gps-data-to-more-than-two-connected-ip-devices-wr44/17672/1 "2016-11-29T16:03:16Z")
I’d like to send GPS data from the Digi Transport WR44 to three other IP devices. In the in web interface under configuration - position \>GPS, there are only two fields available. They are IP connection-1 and IP connection-2. Is it possible to broadcast the GPS data to more than 2 connected IP devices? ---
**Author:** ![NicholasWilson](https://avatars.discourse-cdn.com/v4/letter/n/c77e96/32.png) [@NicholasWilson](https://forums.digi.com/u/NicholasWilson)\ **Post date:** [November 30, 2016, 2:11am UTC](https://forums.digi.com/t/sending-gps-data-to-more-than-two-connected-ip-devices-wr44/17672/2 "2016-11-30T02:11:55Z")
I suspect you are using software that is over 3 years old. Digi upgraded the firmware (version 5212) and included the enhancement: The number of IP hosts that GPS data can be forwarded to has been increased from 2 to 8. Check your firmware version and consider upgrading to the latest firmware. ---
**Author:** ![DC1](https://avatars.discourse-cdn.com/v4/letter/d/8dc957/32.png) [@DC1](https://forums.digi.com/u/DC1)\ **Post date:** [January 20, 2017, 1:58pm UTC](https://forums.digi.com/t/sending-gps-data-to-more-than-two-connected-ip-devices-wr44/17672/3 "2017-01-20T13:58:10Z")
Thank you! The version upgrade was all that was needed.