# Sending message to multiple TCP/IP subnets

**URL:** <https://forums.digi.com/t/sending-message-to-multiple-tcp-ip-subnets/10211>\
**Category:** Rabbit\
**Created:** [December 30, 2008, 5:40pm UTC](https://forums.digi.com/t/sending-message-to-multiple-tcp-ip-subnets/10211 "2008-12-30T17:40:51Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jcuster](https://avatars.discourse-cdn.com/v4/letter/j/3ab097/32.png) [@jcuster](https://forums.digi.com/u/jcuster)\
**Post date:** [December 30, 2008, 5:40pm UTC](https://forums.digi.com/t/sending-message-to-multiple-tcp-ip-subnets/10211/1 "2008-12-30T17:40:51Z")

</div>

Hello all,

I am using a RCM3700 to receive status messages from another device. When the status message is received, I am then attempting to pass the status message on to 3 different IP addresses, which may or may not be on different subnets. Is it possible to send out a message from one TCP/IP interface over different subnets?

Any help would be greatly appreciated.

Justin