# Serial console on connect ME 9210

**URL:** <https://forums.digi.com/t/serial-console-on-connect-me-9210/4297>\
**Category:** Plug N' Play\
**Tags:** serial-interface\
**Created:** [March 3, 2011, 2:49am UTC](https://forums.digi.com/t/serial-console-on-connect-me-9210/4297 "2011-03-03T02:49:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![smachin](https://avatars.discourse-cdn.com/v4/letter/s/a87d85/32.png) [@smachin](https://forums.digi.com/u/smachin)\
**Post date:** [March 3, 2011, 2:49am UTC](https://forums.digi.com/t/serial-console-on-connect-me-9210/4297/1 "2011-03-03T02:49:22Z")

</div>

Hi All,

Out of the box does the connect ME 9210 support a serial console? If yes, can you have both a serial console and a 2nd UART running at the same time?

TY,  
Sean

---

<div class="post-metadata">

**Author:** ![kjensen8](https://avatars.discourse-cdn.com/v4/letter/k/8e8cbc/32.png) [@kjensen8](https://forums.digi.com/u/kjensen8)\
**Post date:** [March 24, 2011, 11:11pm UTC](https://forums.digi.com/t/serial-console-on-connect-me-9210/4297/2 "2011-03-24T23:11:13Z")

</div>

Hi Sean,  
It depends on the firmware running on the ME 9210. If it’s the Digi plug and play firmware, you can configure it to accept commands via the serial port (the ‘serial console’ you are referring to). Otherwise, with NETOS, the module by default has a serial console feature that you can use to configure it.  
Knight