# Services do not start after reboot.  Manual intervention required.

**URL:** <https://forums.digi.com/t/services-do-not-start-after-reboot-manual-intervention-required/15849>\
**Category:** Realport\
**Tags:** server, anywhereusb14, eft, realport, reboot\
**Created:** [November 25, 2015, 2:23pm UTC](https://forums.digi.com/t/services-do-not-start-after-reboot-manual-intervention-required/15849 "2015-11-25T14:23:23Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![LFPREQ](https://avatars.discourse-cdn.com/v4/letter/l/7ea924/32.png) [@LFPREQ](https://forums.digi.com/u/LFPREQ)\
**Post date:** [November 25, 2015, 2:23pm UTC](https://forums.digi.com/t/services-do-not-start-after-reboot-manual-intervention-required/15849/1 "2015-11-25T14:23:23Z")

</div>

Operating System: Windwos 2012 Standard Ed. R2  
Hardware: Virtual

My problem I’m experiencing is that every time this server reboots, I get the following error messages:

AWUSB RealPortUSB Host Controller Errors has entered Critical state with polled result 10

Shortly after that I get:

Service: EFI XF Server has entered Critical state with polled result 0

At that point, I need to log onto the server and open “AnywhereUSB Remote Hub Configuration Utility” and hit the disconnect and reconnect buttons before the AnywhereUSB and associated services are available.

Your input is appreciated.

:anywhereUSB  
:RealPort

---

<div class="post-metadata">

**Author:** ![halovapor](https://avatars.discourse-cdn.com/v4/letter/h/54ee81/32.png) [@halovapor](https://forums.digi.com/u/halovapor)\
**Post date:** [November 25, 2015, 2:24pm UTC](https://forums.digi.com/t/services-do-not-start-after-reboot-manual-intervention-required/15849/2 "2015-11-25T14:24:25Z")

</div>

What version of the AnywhereUSB driver are you using and what firmware does the AnywhereUSB device have installed?

---

<div class="post-metadata">

**Author:** ![LFPREQ](https://avatars.discourse-cdn.com/v4/letter/l/7ea924/32.png) [@LFPREQ](https://forums.digi.com/u/LFPREQ)\
**Post date:** [November 25, 2015, 2:27pm UTC](https://forums.digi.com/t/services-do-not-start-after-reboot-manual-intervention-required/15849/3 "2015-11-25T14:27:42Z")

</div>

3.51.49 for the driver  
2.30.005 for the firmware

---

<div class="post-metadata">

**Author:** ![halovapor](https://avatars.discourse-cdn.com/v4/letter/h/54ee81/32.png) [@halovapor](https://forums.digi.com/u/halovapor)\
**Post date:** [November 25, 2015, 2:28pm UTC](https://forums.digi.com/t/services-do-not-start-after-reboot-manual-intervention-required/15849/4 "2015-11-25T14:28:59Z")

</div>

Have you tried to uninstall the AnywhereUSB drivers and reboot the vm? The reinstall the AnywhereUSB 3.51 driver. You must have the AnywhereUSB/5 G1 product if using those drivers in Server 2012 R2?

---

<div class="post-metadata">

**Author:** ![LFPREQ](https://avatars.discourse-cdn.com/v4/letter/l/7ea924/32.png) [@LFPREQ](https://forums.digi.com/u/LFPREQ)\
**Post date:** [November 25, 2015, 8:27pm UTC](https://forums.digi.com/t/services-do-not-start-after-reboot-manual-intervention-required/15849/5 "2015-11-25T20:27:45Z")

</div>

Thanks Halovapor. I’ve recommeded that to our App Group. I thought there may have been something else a member in this forum would have directed me to, seeing you are suggesting what I thought we’d need to do, I’ve already passed the information to the App team.

Thanks for the help!

---

<div class="post-metadata">

**Author:** ![halovapor](https://avatars.discourse-cdn.com/v4/letter/h/54ee81/32.png) [@halovapor](https://forums.digi.com/u/halovapor)\
**Post date:** [December 2, 2015, 10:24am UTC](https://forums.digi.com/t/services-do-not-start-after-reboot-manual-intervention-required/15849/6 "2015-12-02T10:24:53Z")

</div>

Just to confirm, what model of the AnywhereUSB product are you using?