# Set my own program on xBee3 MCU ?

**URL:** <https://forums.digi.com/t/set-my-own-program-on-xbee3-mcu/19616>\
**Category:** XBee - Zigbee\
**Tags:** programmable, xbee\
**Created:** [June 26, 2018, 1:01pm UTC](https://forums.digi.com/t/set-my-own-program-on-xbee3-mcu/19616 "2018-06-26T13:01:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![thibtac](https://avatars.discourse-cdn.com/v4/letter/t/9dc877/32.png) [@thibtac](https://forums.digi.com/u/thibtac)\
**Post date:** [June 26, 2018, 1:01pm UTC](https://forums.digi.com/t/set-my-own-program-on-xbee3-mcu/19616/1 "2018-06-26T13:01:25Z")

</div>

I cannot find the way to set my own program in the microcontroller. I have just seen the software xBee Multi Programmer but we need a Multi Programmer board to do that …  
Is there another way to do that ?