# Sleep Current

**URL:** <https://forums.digi.com/t/sleep-current/2271>\
**Category:** XBee - Zigbee\
**Created:** [July 3, 2008, 10:57am UTC](https://forums.digi.com/t/sleep-current/2271 "2008-07-03T10:57:07Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Junknc](https://avatars.discourse-cdn.com/v4/letter/j/b487fb/32.png) [@Junknc](https://forums.digi.com/u/Junknc)\
**Post date:** [July 3, 2008, 10:57am UTC](https://forums.digi.com/t/sleep-current/2271/1 "2008-07-03T10:57:07Z")

</div>

The datasheet tell me that the Xbee Series 2 (Znet) module 's shutdown current is less than 1uA.But my testing value is about 180uA. I use the PIN sleep mode.  
the following is my test circuit diagram.

my question is : is there any special configuration when module enters sleep mode to minimize the current?
