# sleep immediate in Xbee

**URL:** <https://forums.digi.com/t/sleep-immediate-in-xbee/21813>\
**Category:** XBee - DigiMesh\
**Tags:** micropython, sleep, xbee3\
**Created:** [September 23, 2020, 2:35pm UTC](https://forums.digi.com/t/sleep-immediate-in-xbee/21813 "2020-09-23T14:35:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Girish\_HL](https://avatars.discourse-cdn.com/v4/letter/g/bbce88/32.png) [@Girish\_HL](https://forums.digi.com/u/Girish_HL)\
**Post date:** [September 23, 2020, 2:35pm UTC](https://forums.digi.com/t/sleep-immediate-in-xbee/21813/1 "2020-09-23T14:35:50Z")

</div>

Hi I’m working on Digi Xbee3 micro module firmware version 300B and in mycropython mode. I need to configure the device such a way that it should draw low battery so is there any option for sleep immediate after transmitting data kindly let me and thank you in advance.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [September 23, 2020, 2:43pm UTC](https://forums.digi.com/t/sleep-immediate-in-xbee/21813/2 "2020-09-23T14:43:54Z")

</div>

If you are using a Mesh network, then no. But if you are doing point to point, point to multi-point, you can use the sleep.now function.