# Sleep Mode Configuration XBP24-DM

**URL:** <https://forums.digi.com/t/sleep-mode-configuration-xbp24-dm/1086>\
**Category:** XBee - DigiMesh\
**Created:** [February 10, 2010, 2:18pm UTC](https://forums.digi.com/t/sleep-mode-configuration-xbp24-dm/1086 "2010-02-10T14:18:28Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![abe1974](https://avatars.discourse-cdn.com/v4/letter/a/22d042/32.png) [@abe1974](https://forums.digi.com/u/abe1974)\
**Post date:** [February 10, 2010, 2:18pm UTC](https://forums.digi.com/t/sleep-mode-configuration-xbp24-dm/1086/1 "2010-02-10T14:18:28Z")

</div>

I’m try to configure my network to sleep. My sleep coordinator is set to cycle but my routers will not sync to the sleep cycle. The manual is for the old version of firmware. I’m running 804B. I do not think I have the settings correct for the routers. Does any one know were I can find a updated manual or what the proper configuration is for a sleeping network.

---

<div class="post-metadata">

**Author:** ![jagguchwdary](https://avatars.discourse-cdn.com/v4/letter/j/91b2a8/32.png) [@jagguchwdary](https://forums.digi.com/u/jagguchwdary)\
**Post date:** [February 10, 2010, 4:48pm UTC](https://forums.digi.com/t/sleep-mode-configuration-xbp24-dm/1086/2 "2010-02-10T16:48:16Z")

</div>

have u updated u r X-CTU with the newer version which is released right now.

y cant u set u r modules to the cyclic sleep or pin awake sleep.

regards  
jaggu

---

<div class="post-metadata">

**Author:** ![abe1974](https://avatars.discourse-cdn.com/v4/letter/a/22d042/32.png) [@abe1974](https://forums.digi.com/u/abe1974)\
**Post date:** [February 10, 2010, 4:59pm UTC](https://forums.digi.com/t/sleep-mode-configuration-xbp24-dm/1086/3 "2010-02-10T16:59:13Z")

</div>

I’m currenlty trying to set the cyclic sleep. Here r my settings

Sleep Coordinator

SO= 0 For sleep coordinator  
SM= 8 SYC  
My wake time is 1 minute & sleep 2 sec

router settings

SO= 2 Enable API sleep messages  
SM=8 SYC

same wake time & sleep time as the C.

The router does seem to sync. I’m watching the sleep pin 13 on a scope. Does the C sleep?

---

<div class="post-metadata">

**Author:** ![abe1974](https://avatars.discourse-cdn.com/v4/letter/a/22d042/32.png) [@abe1974](https://forums.digi.com/u/abe1974)\
**Post date:** [February 10, 2010, 5:07pm UTC](https://forums.digi.com/t/sleep-mode-configuration-xbp24-dm/1086/4 "2010-02-10T17:07:47Z")

</div>

Sorry I meant to say the router does not sync and I do not see the C sleeping ethier.

---

<div class="post-metadata">

**Author:** ![aogdon](https://avatars.discourse-cdn.com/v4/letter/a/e79b87/32.png) [@aogdon](https://forums.digi.com/u/aogdon)\
**Post date:** [February 10, 2010, 10:17pm UTC](https://forums.digi.com/t/sleep-mode-configuration-xbp24-dm/1086/5 "2010-02-10T22:17:08Z")

</div>

A beta version of the manual is available upon request through Digi directly. Just contact tech support via phone at (866) 765-9885 or online support at [http://www.digi.com/support/eservice/login.jsp](http://www.digi.com/support/eservice/login.jsp) with your request.