# SNMP manager sample

**URL:** <https://forums.digi.com/t/snmp-manager-sample/13446>\
**Category:** NET+OS\
**Tags:** snmp, digi\
**Created:** [August 11, 2014, 12:12pm UTC](https://forums.digi.com/t/snmp-manager-sample/13446 "2014-08-11T12:12:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mpivoto](https://avatars.discourse-cdn.com/v4/letter/m/cdc98d/32.png) [@mpivoto](https://forums.digi.com/u/mpivoto)\
**Post date:** [August 11, 2014, 12:12pm UTC](https://forums.digi.com/t/snmp-manager-sample/13446/1 "2014-08-11T12:12:35Z")

</div>

I have a question.

I’m trying to make two devices communicate alert by SNMP protocol.

One such device, which is the SNMP agent on this IP: 192.168.100.30, and to connect this equipment alert by MIB Browser I can read and write data to it normally.

A second gear is on the same network from the above, the IP 192.168.100.32 equipment he uses DIGI and I would like to read the above equipment infomações alert by SNMP.

My debt and how I can do this. Is there any example to help me?

I use DIGI Connect ME v 7.4

---

<div class="post-metadata">

**Author:** ![dakotas\_dad](https://avatars.discourse-cdn.com/v4/letter/d/a88e57/32.png) [@dakotas\_dad](https://forums.digi.com/u/dakotas_dad)\
**Post date:** [August 18, 2014, 7:47am UTC](https://forums.digi.com/t/snmp-manager-sample/13446/2 "2014-08-18T07:47:27Z")

</div>

Hello

From within Digi ESP look at the following projects:  
SNMP Sample  
SNMP V3 Sample  
(File-\>New-\>NET+OS Sample Project)

Both bring up a CLI that among other things allows you to send out sample traps. You can use that code to see how to use the APIs for sending traps.