# Software Integration

**URL:** <https://forums.digi.com/t/software-integration/20887>\
**Category:** XBee & XBee Gateway\
**Tags:** xbee\
**Created:** [November 13, 2019, 9:20am UTC](https://forums.digi.com/t/software-integration/20887 "2019-11-13T09:20:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Key\_General\_Trading](https://avatars.discourse-cdn.com/v4/letter/k/e36b37/32.png) [@Key\_General\_Trading](https://forums.digi.com/u/Key_General_Trading)\
**Post date:** [November 13, 2019, 9:20am UTC](https://forums.digi.com/t/software-integration/20887/1 "2019-11-13T09:20:18Z")

</div>

Can Version:4.2.11 DIGI software can be integrated with PMS?  
Thanks.

---

<div class="post-metadata">

**Author:** ![mvut](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.digi.com/mvut/32/31_2.png) [@mvut](https://forums.digi.com/u/mvut)\
**Post date:** [November 13, 2019, 11:40am UTC](https://forums.digi.com/t/software-integration/20887/2 "2019-11-13T11:40:41Z")

</div>

I think you are asking if you can use PSM mode with the XBee LTE CAT M Modem using firmware version xx4.2.11. If that is correct. Then yes, you can use PSM mode on that module with this version of the modules firmware.
